Continuously variable Texture control for Silk modes allows the engineer to fine tune the harmonic ratio and tonality of both stereo outputs. The SILK push button cycles between Red, Blue, and bypass.
With exceedingly low crossover distortion and unmatched purity, the 5059 sets the standard for rack-mountable summing mixers.
Beyond providing galvanic isolation, the custom transformers in the 5059 are a key ingredient to its larger than life sound.
Sends the channel’s signal to the Stereo 2 bus which allows for two stems to be mixed and processed simultaneously.
Individual continuously variable level controls are provided for each channel from -∞ to +10dB.
Individual center-detent pan controls are provided on each channel of the 5059 with a 3dB pan law.
Engages the Insert Return inputs on the rear panel. (Insert sends are always active.)
Level controls are provided for each of the stereo outputs -∞ to 0dB.
FREQUENCY RESPONSE
100K Ohm Load.
+/- 0.1 dB from 20 Hz to 20 kHz
-3 dB @ 3.5 Hz / 185 kHz
NOISE
IEC-A-weighted.
Bus Outputs: -106 dBV
Single Channel assigned @ -∞: -104 dBV
Single Channel assigned @ Unity: 103 dBV
NOISE
Un-weighted, 22 Hz - 22 kHz.
Single Channel assigned @ +10 dB - 100 dBV
BUS OUTPUTS
Single Channel assigned @ -∞: -101 dBV
Single Channel assigned @ Unity: -100 dBV
Single Channel assigned @ +10 dB -97 dBV
SIGNAL TO NOISE
+20 dBu output un-weighted, 22 Hz - 22kHz: 116 dB
+20 dBu output, IEC A weighted: 119 dB
+4 dBu output unweighted, 22 Hz - 22 kHz: 100 dB
+4 dBu output, IEC A weighted: 103dB
OUTPUT LEVEL
Summing Buses to XLR outputs, Maximum Output Level, 20 Hz to 40 kHz: +26 dBu
Single Channel to Bus, Maximum Output Level, 20 Hz to 40 kHz: +24.5 dBu
TOTAL HARMONIC DISTORTION AND NOISE
1 kHz @ +20 dBu output: Better than 0.003%
20 Hz @ +20 dBu output: Better than 0.005%
TOTAL HARMONIC DISTORTION, SILK ENGAGED
BLUE SILK
100 Hz @ +20 dBu output, texture control 12 o’clock: 0.2% typical
100 Hz @ +20 dBu output, texture control fully CW: 0.65% typical
RED SILK
100 Hz @ +20 dBu output, texture control 12 o’clock: 0.1% typical
100 Hz @ +20 dBu output, texture control fully CW: 0.35% typical
SLEW RATE
4V/uS
CROSSTALK
From Bus 1 to Bus 2.
1 kHz: Better than -90 dB
10 kHz: Better than -70 dB
POWER CONSUMPTION
AC Mains, 100VAC to 240VAC, 50/60 Hz: 45 Watts
Fuses – not user accessible, internal on power supplies
UNIT DIMENSIONS
2RU: 19” W x 9.25” D x 3.5” H
(48.3 cm W x 23.5 cm D x 8.9 cm H)
UNIT WEIGHT
14.5 lbs. (6.6 kg)
SHIPPING DIMENSIONS
22” W x 14” D x 9” H
(55.9 cm W x 35.6 cm D x 22.9 cm H)
SHIPPING WEIGHT
17 lbs. (7.7 kg)